DISTRIBUTOR & SPLITTER

| Grease Lubrication Distributor, Progressive Lubrication DividerSeries

| PRODUCTS DESCRIPTION

Product : JPQ Progressive Lubrication Distributor
Products Advantage :
1. Max. Operation pressure up to 20Mpa/200bar
2. 3 – 8 nos. segments available as per different grease volume requirement
3. Three kinds of series, several flow rate volume for optional

Progressive Lubrication distributor JPQ series is grease lubrication distributor, progressive lubrication divider made of high carbon steel consists of top, end segment and 3-8 pcs. As middle segment for optional as per different grease feeding volume and number of grease outlet requirements. In addition to the minimum grease volume specification of progressive lubrication distributor JPQ series (including single and double outlet), each other segment has a will be able to equipped with cycle indicator.

Progressive Lubricator Distributor JPQ Series Operation :
1. The one reciprocating piston strike in middle segment as one grease feeding cycle, the one complete cycle of distributor JPQ finished as the piston strokes in each middle block, the sum of the number of cycles per unit time for all middle segment of the distributor JPQ is the operating frequency.
2. The working environment temperatura -30 – +80 C
3. The use of media of progressive lubrication distributor JPQ series for the cone penetration of not less than 290 (250 C, 150g) 1/10mm, filtration accuracy of not less than 100um of grease or viscosity of not less than 17c S t, precision of not less than 25um of lubricating oil.

| Ordering Code of Progressive Lubrication Distributor JPQ Series

| Progressive Lubrication Distributor JPQ Series Technical DataSeries

| PROGRESSIVE DISTRIBUTOR

| IN USE WITH GREASE OR OIL

standard version:

• modular progressive distributor in aluminum-lightweight design for all FlexxPump 125 / 400 / 1500 for DLS-greases and FlexxPump 125 / 500 / 2000 für DLS-Oils
• 2 to 10 outlets per distributor possible
• tube connectors for tube 6mm, straight for inlet and outlets
• maximum pressure 100 bar

special design (on request):

• tube connectors with various design, straight / angled
• tubes with different diameter 4 / 6 / 8 at in – and outlet
• different positions of the outlets
• different lubricant quantities per outlet due to metering elements
  with different dosing volumes ( 25 / 50 / 100 mm³)

notes:

• only use with DLS-lubricants
• temperature range: +10°C to max. +60°C
• do not use distributors in a row ( no cascade)

| PROGRESSIVE DISTRIBUTOR WITH CIRCULATION MONITORING

| IN USE WITH GREASE OR OIL

standard version:

• modular progressive distributor in aluminum-lightweight design for all FlexxPump 125 / 400 / 1500 for DLS-oils and FlexxPump 125 / 500 / 2000 für DLS-Oils
• with sensor, for control of the correct operation of all outlets
• 2 to 10 outlets per distributor possible
• tube connectors for tube 6mm, straight for inlet and outlets
• maximum pressure 100 bar

special design (on request):

• tube connectors with various design, straight / angled
• tubes with different diameter 4 / 6 / 8 at in – and outlet
• different positions of the outlets
• different lubricant quantities per outlet due to metering elements
  with different dosing volumes ( 25 / 50 / 100 mm³)

notes:

• only use with DLS-lubricants
• temperature range: +10°C to max. +60°C

do not use distributors in a row ( no cascade)

| SPLITTER

| IN USE WITH GREASE OR OIL

Standard version:

• 2 to 4 outlets per splitter possible
• tube connection to inlet and outlets straight for hose 6 × 4
• Maximum pressure 100 bar
• Temperature range: + 10 ° C … + 60 ° C

options:

• tube connection in angled designs at inlet and outlet possible
• tube connection for tube 4 and 8 at inlet and outlet possible