ACCESSORIES FOR SINGLE POINT
| Easylube Service pack
Please refer to MQL tool of TPMS Software.The original service pack suggested by MQL is based on the theory of Tribology, which bearing spec and its working condition are considered to figure out the most suited lubrication standard. Please follow the recommendation to ensure the best lubrication quality and enjoy the complete warranty coverage.
Replacement Usage: To guarantee product performance, grease cup and battery are required to be replaced at every end of dispensing period. When RED indicator light flashes, maintenance technician has to check immediately whether it is feed blockage, grease empty or battery low.
Use only recommended accessories to optimize product performance, reduce grease consumptions, prevent contamination and enjoy quick return on investment.
| DIY Refilling Kit
Suggestion:
To assist for the suitable lubrication measurement; please do offering satisfiable service with selected grease cartridge, accessories and installation which will save your customers and you a lot of troubles in chasing between equipment and lubricant; thus the proper grease cartridge cups and installation accessories are based to test and verify by Hornche engineers and technical team and lubrication system stability will be guaranteed by manufacturer HORNCHE CORPORATION as well.
DIY refilling kit for 60 model lubricator
| Part No. | Description |
| P- 60C | Empty cartridge for lubricator model 60 |
| P- 151C | Piston position cap (a reuse unit) |
| P- 400G | Cartridge pre-filling nipple 1/2” (F) |
DIY refilling kit for 150 model lubricator
| Part No. | Description |
| P- 170C | Empty cartridge for lubricator model 150 |
| P- 151C | Piston position cap (a reuse unit) |
| P- 400G | Cartridge pre-filling nipple 1/2” (F) |
DIY refilling kit for 250 model lubricator
| Part No. | Description |
| P- 260C | Empty cartridge for lubricator model 250 |
| P- 251C | Piston position cap (a reuse unit) |
| P- 400G | Cartridge pre-filling nipple 1/2” (F) |
For filling extension tube from mounting bracket
| Part No. | Description |
| P- 404G | Tube pre-filling nipple 1/2” (M) |
Automatic Filling Machine
| Part No. | Description |
| P- 007AF | (for 150/250 ml cartridge) |
| Direct Mounting
Straight Adaptors
| Product | Part No. | Description | Example |
 |
P-403S P-402S P-401S P-410S P-408S P-201S P-108S P-106S |
1/2” (F) to 3/8” (M), Straight 1/2” (F) to 1/4” (M), Straight 1/2” (F) to 1/8” (M), Straight 1/2” (F) to 10 mm(M), Straight 1/2” (F) to 8 mm (M), Straight 1/4” (F) to 1/8” (M), Straight 1/8” (F) to 8 mm (M), Straight 1/8” (F) to 6 mm (M), Straight |
 |
45° Angle Adaptors
| Product | Part No. | Description | Example |
 |
P-403A P-402A P-401A P-410A P-408A P-201A P-108A |
1/2” (F) to 3/8” (M), 45°angle 1/2” (F) to 1/4” (M), 45°angle 1/2” (F) to 1/8” (M), 45°angle 1/2” (F) to 10 mm (M), 45°angle 1/2” (F) to 8 mm (M), 45°angle 1/4” (F) to 1/8” (M), 45°angle 1/8” (F) to 8 mm(M), 45°angle |
 |
 |
CAUTION: Use mounting bracket when installation condition is as below stated : 1. Ambient temperature exceeds 140°F (60°C) or bearing surface temperature exceeds 122°F (50°C) 2. Grease nipple’s thread is 6mm, 1/16″ or less 3. Area which is difficult to access during grease refilling |
Support Connector & Pipe
| Product | Part No. | Description | Example |
 |
MM-111 MM-121 MM-131 FF-101 FF-191 |
Pipe, 1/8” (M/M) x 29 mm (L) Pipe, 1/8” (M/M) x 58 mm (L) Pipe, 1/8” (M/M) x 89 mm (L) Connecter 1/8” (F/F), Straight Connecter 1/8” (F/F), 90°angle |
 |
| Direct Mounting
| Product | Part No. | Description | Example |
 |
P-506C |
H 60 x W 50 x D 40 mm |
 |
|
|||||
 |
P-506C + | P405F or P406F |  |
||
| P401F or P402F | |||||
| CAUTION: Do not install the lubricator at ambient temperature over 140°F (60°C) or 15 feet (4.6 m) away from the lubrication point. P-405F mounting bracket and PU tube are suitable for most application. But if the bearing surface temperature exceeds 122°F (50°C), then P-406F and copper pipe are needed.
|
Mounting Arm for Grid
| Product | Part No. | Description | Example |
 |
P-507C |
H 200 x W 50 x D 20 mm |
 |
|
 |
|||
| P-507C + | P405F or P406F | |||
| P401F or P402F | ||||
Mounting Bracket
| Product | Part No. | Description |
 |
P-405F |
1/2” (F) to PU tube, Ø 5 x 8 mm |
 |
P-406F |
1/2” (F) to Copper Pipe, Ø 6 x 0.8 mm |
 |
P-402F P-401F |
1/2” (F) to 1/4” (M) connecter 1/2” (F) to 1/8” (M) connecter |
Check Valve for Oil Lubrication
| Product | Part No. | Description |
 |
P-202V |
Check Valve 1/4” (F) to 1/4” (F) connecter |
PU Tube Mounting Adaptors for P-405F
| Product | Part No. | Description |
 |
P-502U P-501U P-500U |
Connector 1/4” (M), Straight Connector 1/8” (M), Straight Connector 1/16” (M), Straight |
 |
P-510M P-508M P-506M |
Connector 10 mm (M), Straight Connector 8 mm (M), Straight Connector 6 mm” (M), Straight |
 |
P-592U P-591U P-590U |
Connector 1/4” (M), 90°angle Connector 1/8” (M), 90°angle Connector 1/16” (M), 90°angle |
 |
P-502USP P-501USP |
Fast connector 1/4” (M), Straight Fast connector 1/8” (M), Straight |
 |
P-510MSP P-508MSP P-506MSP |
Fast connector 10 mm (M), Straight Fast connector 8 mm (M), Straight Fast connector 6 mm(M), Straight |
 |
P-592USP P-591USP |
Fast connector 1/4” (M), 90°angle Fast connector 1/8” (M), 90°angle |
Copper Pipe Mounting Adaptors for P-406F
| Product | Part No. | Description |
 |
P-603H P-602H P-601H |
Connector 3/8” (M), Straight Connector 1/4” (M), Straight Connector 1/8” (M), Straight |
 |
P-693H P-692H P-691H P-608H |
Connector 3/8” (M), 90°angle Connector 1/4” (M), 90°angle Connector 1/8” (M), 90°angle Copper Pipe, Ø 6 x 0.8 mm 50 meter per roll |
 |
P-108S P-108A P-106S P-106A |
1/8” (F) to 8 mm (M), Straight 1/8” (F) to 8 mm (M), 45°angle 1/8” (F) to 6 mm (M), Straight 1/8” (F) to 6 mm (M), 45°angle |
|
IMPORTANAT ： |
| Please follow installation guide step-by-step to assure Easylube operates successfully, and kindly refer to the Troubleshooting Chart if you encounter any problem during operation. |
| Power Unit Adapter
DC Power Supply Adapter
for 250ml model
Easylube® P-606L
DC Power Supply Adapter
for 60ml / 150ml model
Easylube® P-606S
Stable, Economical, Handy, Eco-friendly
Easylube® P-606S and Easylube® P-606L are made for improving the performance of battery driven power supply. Easylube® DC Power Supply Adapter can be simply put on the driver to replace lithium batteries to provide more stable DC power supply.
The operating temperature of DC Power Supply Adapter is from -30°C~80°C. Stable DC power supply can be guaranteed in both indoors and outdoors to deal with harsh working environment. Problems like changing lithium batteries too often and further management can be greatly improved.
| Specifications | |
| Adapter type | Easylube® P-606S ( For 60ml / 150ml model ) Easylube® P-606L ( For 250ml model ) |
| Input | DC 10 – 36V  2A |
| Output | DC 5.7V 2A |
| Power | 12W |
| Flammability Rating | Main case HB |
| IP Rating | IP 65 |
| Cord Length | 1 meter |
| Related Documents |  DC Adapter Catalogue |
Attention
- When connecting this unit to AC power, please make sure the power supply meets the technical requirement of this product.
- After installing this power supply, each time the start switch (ON/OFF) will reset the operation program (RESET), the lubricator will return to zero and re-execute the automatic greasing program (1-360 times).
- After installation, observing the position of piston in the grease cup is necessary. Make sure to replace with new grease cup when the piston is almost at the bottom of grease cup.
- Before the end of the automatic greasing, the greasing piston will still keep running even it is already at the bottom of the grease cup. It will only stop till the pressure reaches the warning level, which might lead to deformation at the bottom of the grease cup that caused by overpressure.
- After switching to DC adapter, the automatic lubricator will no longer comply with the UL explosion-proof certification specifications. Please make sure that the method of power connection and standard comply with local electrical regulation.
| Products
Automatic Lubricator
Accessories For Lubrication System
Machine Tools Accessories
VERSADA are investing inappropriate level of stocks to bridge the gap between users and manufacturers, this business model has enabled VERSADA to respond promptly and delivering the necessary products in the needed amounts at the right time with the competitive price.
0851-0038-1515 / 0851-0173-4223 (WA)
(021) 89908349
info@versada.co.id
Ruko Roxy blok A N0. 10 Jl. MH. Thamrin, Lippo Cikarang, Bekasi 17550 Jawa Barat - Indonesia
